1/2" Motor Only For Magnetic Drill Press 11.5Amp 600Rpm

For use with 4202 or 4203 drill stand. 120V AC. No. 4253-1. Capacity 1/2" drill, 5/8"-18 tap. One chuck position; chuck center distance from base 1-23/32" with plate forward, 31/32" with plate back. 1-3/8" with plate back. Center distance farthest from base 5-3/32" with plate forward, 4-11/32" with plate back. Amps: 6.2 No Load RPM: 600